Our own IDEA wheels and frames · Hradec KrálovéDiscover Road Stage racing

IDEA / ENGINEERING & ATELIER

Every detail
has a purpose

A carbon rim, precisely tensioned spokes and a reliable hub. IDEA wheel quality comes from how they work together — from development and measurement to hand building and long-term servicing.

IDEA / PRECISION IN EVERY DETAILA close-up of IDEA hub construction
Designed as a wholeRim / spokes / hub
A wheelset being measured and checked by hand in the workshopIDEA / HAND BUILDING & INSPECTION

01 / DEVELOPMENT, MANUFACTURING & CARE

Quality is the harmony
of every component

01

A profile with a purpose

Aerodynamic and deformation simulations help compare rims and spokes. We also choose rim depth to suit the terrain and riding style, rather than relying on a single test result.

02

The precision of hand building

Rim dimensions, spoke lengths, hub drilling and lacing must work together. Checking the wheel build and spoke tension matters too.

03

Wheels with long-term support

Individually replaceable IDEA carbon spokes, conventional truing and documented bearing dimensions make ongoing wheel care and servicing easier.

FROM TRAINING BACK TO THE WORKSHOP

Experience complements measurement

Team experience connects riding, equipment selection and servicing. The Rafkarna IDEA Cycling Team name reflects the long-term partnership with Rafkarna and its IDEA brand.

IDEA team & development

02 / TECHNICAL GUIDE

Your wheels
All the essential data

Choose your model and go straight to
what you need to know

Road / TECHNICAL SHEET

IDEA R45 CALOBRA ULTRA

Link to the technical sheet

The right tyre and the right pressure

Choose your tyre size and rider weight from the IDEA table. For gravel and MTB, the pressure is an indicative value for firm surfaces; adjust the setup to suit off-road conditions.

If you know your tyre’s pressure limit, enter it here. The lower of the rim and tyre limits always applies.

INDICATIVE PRESSURE

3.6bar

IDEA R45 CALOBRA ULTRA
28 mm / 75 kg

Rim maximum
5.5 bar
Limit for the selected combination
5.5 bar

An indicative value from the IDEA table. Before use, check your specific tyre and its pressure specification.

COMPATIBILITY / HOOKLESS

Tubeless tyres
in a suitable width

IDEA rims use a hookless profile. Choose a tubeless tyre approved for hookless use and for the rim width, even when fitting a conventional inner tube.

28 mm30 mm32 mm

Listed uses for this size: road

Do not exceed the rim or tyre pressure limit. 1 bar = 14.5 psi.

03 / IDEA TEST LAB

Measure, compare
Understand the differences

In a simulation at 50 km/h, R55 CALOBRA had the lowest drag of the three road rims tested. A deeper rim is not automatically the answer for every route — lighter, shallower rims also have their place in the hills and on rolling terrain.

50 km/hAero simulation speed
50 NDeformation test load
Explore individual test results
A CAD simulation of airflow around an IDEA rim profile
IDEA TEST LAB / AERODYNAMICSAirflow simulation

04 / RIM & TYRE WORKING TOGETHER

Volume, pressure
and confident grip

Tyre width and suitable pressure complete the wheel’s ride characteristics. We also offer the milKit system for compatible tubeless setups.

Find the right pressure for my model
The milKit tubeless system for IDEA wheels

IDEA / FILM

Explore the details
in motion

Open the film separately

PERSONAL RECOMMENDATIONS

Data is the starting point
We’ll refine it for you

Tell us what and where you ride. We’ll recommend a suitable setup, check compatibility and take care of ongoing servicing.

Discuss my wheels